Welcome to Nantai Precise Machinery & Tech. Ltd., Foshan

 

Service Hotline

0757-86763038

 

 

 

Address: No.3, Zhixin Rd., Leping, 

Sanshui, Foshan, Guangdong, China
Postal Code: 528137
Tel: + 86-757-86763038 (China Intl.)

            81819619(Domestic)
            81819626 (Office)
            86763038 (International)

 Email: nantai@china-nantai.com

Your present location:HomeProductAutomatic Flatbed Die-cutter > Automatic Flatbed Die-cutter AP-165E III
  • 名称: Automatic Flatbed Die-cutter AP-165E III
  • 型号: AP-165E III
  • 上架时间: 2017-07-21
  • Views : 140

AP-165E III

AUTOMATIC FLATBED DIE-CUTTING MACHINE

 

MODEL

AP-165E III

Maximum sheet size

1200X1650mm

Minimum sheet size

500X600mm

Miximum cutting size

1180X1630mm

Gripper size

15(±5)mm

Inside size

 

Maximum operational pressure

350tons

Applicable thickness of corrugated board

1-9mm

Maximum speed

6000i.p.h

Required power supply

36KW (key motor 22KW)

Net weight of machine

38tons

 

Features in performance

lManufactured primarily for the corrugated board industry using our latest Lap Feeder system

with servo driven vacuum suction belt.

lAccurate die-cutting from micro flute material upto double wall corrugated.

lFull stripping is available by use of our stripping section and grip edge waste removal device.

lDesigned to be flexible and adaptable for small and large format production.

lBuilt using up to date modern safety systems for added security. 

lAll function controls are on the exterior of the machine and the die-cutting tools are inserted

from outside of the machine.

lMulti out formats can run with ease using our latest technology in the delivery section.

Torque limit device inside Cambox can protect the machine from urgent stop on high speed

running due to cardboard block.

Whole machine has 14 sets of independent servo drivers to do auto adjustment, only need to

press the order store system at interface, machine can finish the order change adjustment in

20 seconds,highest improve the efficiency of changing order.

 

 

 

Feeding section

lThe newest servo-drive and vacuum suction belt feeding system (lead edge feeding type) 

guarantees the smooth feeding of large size cardboard and improves the operation and 

production ability. Highly precise feeding without damaging the cardboard strength.

lSuitable for all kinds of paper, and data setting can be adjusted on the touch screen.

lBig size front and side baffles make cardboard at right position, providing high 

die-cutting precision.

lPaper leveling device is specially designed for bent cardboard, stopping cardboard 

cover the front baffle.

 

 

 

Press section

lSteady die-cutting performance guarantees the high precision. Strong and reliable high 

speed driven guarantees the smooth running of gripper bar.

lDie-cutting frame locking structure, the die-cutting steel plate is used air reducer 

to reduce the weight, easy control. With transducer to prevent the plate in wrong position 

which resulting defects brought by deflected creasing line.

lDie-cutting positioning device can realize quick locating and higher accuracy of die-cutting.

lThe hardness die-cutting steel plate can be installed easily and quickly. 

Torque limit device inside Cambox can protect the machine from urgent stop on high speed

running due to cardboard block.

Whole machine has 14 sets of independent servo drivers to do auto adjustment, only need to

press the order store system at interface, machine can finish the order change adjustment in

20 seconds,highest improve the efficiency of changing order.

 

 

 

Stripping section

lThe quick-setting way of die is adopted; operator can finish the setting from exterior,

without entering the machine.

lMale and female die can be inserted into the machine from operation side to shorten 

the setup time and for higher safety.

lUpper and lower frames make the dies succeed in performance. Male and female dies can move 

up-an-down,making stripping more completely

lA plastic film is set between die-cutting section and lower frame for stopping paper swerve. 

It can be adjusted by moving hand crank according to the size on the dies operation direction.

 

 

Knock-off setting

Knock-off plate can be set and fixed from operation side, once self-locking by cylinder.

 

 

Grip edge waste removal device

The grip edge on pin of gripper can be automatically removed and carried out of machine 

by conveyor belt.

 

 

Delively section

lFront and back barriers with side aligning device make receiving tidy.

lSide baffle and back barrier coordinate and can be adjusted by motor based on the size 

on productiion direction.

lDelivery platfrom is driven by motor, easy for setting.

lTemporary receriving device controlled by servo-actuator makes delivery more simple and easy.

 

 

 

Semi-Auto-Pre-Feeder (Optional)

Maximum stack height is 2300mm.

An inline Pile Turner is used to rotate the sheets depending upon the desired print

orientation (Top surface printing or bottom surface printing).

Additional joggers are installed at the end of the conveyor to control the position

of the sheets in the feeder hopper.

This pre-feeder is a fixed type unit that is connected to the floor with an extendable

conveyor that reaches into the feeder of the flatbed die-cutting machine according to

the sheet length.

 

 

Quick plate-change (Optional) 

Alternate replaced plate is optional, realizing non-stop pre-changing plate fuction. 

Hence, save setting time, improve production efficiency and high safety.

 

 

Turn Table and Breaker (Optional)

Addaptable unit used to automatically separate the blanks in bundle format after

the die-cutting process. 4 piles can be separated in one process using our high

pressure hydraulic system.

 

 

Transmission and lubrication system

Transmission adopts Sankyo cam box (graduator) and safety cluth, can adjust the movement of 

each part accurately. It has the characteristics of accurate indexing, stable performance 

and durability.

 

Imported oil cooling device from Japan guarantees that machine parts protected by oil film can 

operate well.

The gear of special crank shaft gear transmission device and force lubrication system are from 

Osaka Japan that made from accurate high quality alloy steel, and processed by hardening abrasive 

machining, providing higher precision and strength and wear-resistance, making the movement of 

machine smoothly.

Forced lubrication system can be oiled from inside of the machine, and maintains a long-term 

high accuracy, and for longer service life.

Key words :